It's a 5lt jerry can corresponding in shape and dimension to the common containers for agrochemical products. The handle is sealed at both ends (in order to avoid the stagnancy of the product during the emptying) and blow-moulded (for an easier hold).
Equipped with a DIN 63 opening, it has been designed to be closed with a particular cap with a thermo induction seal. This kind of jerry can is not stackable and must be packed in boxes (usually 4 jerry cans per box).

It's a 5lt jerry can with not only an homologation for the standard 5lt, but also with a particular homologation for the transport of Hydrogen Peroxide. The handle is sealed at both ends (in order to avoid the stagnancy of the product during the emptying) and blow-moulded (for an easier hold).
Equipped with a DIN 61 opening, it has been designed to be closed with a self-sealing cap. This kind of jerry can is not stackable and must be packed in boxes (usually 4 jerry cans per box).

It's a short and large jerry can particularly suitable for the containment and transport high Specific Weight products (the four sides, which are shorter than those of the C3 jerry cans, grant the C2 a very high resistance at crushing).
The C2 jerry cans are homologated for X class dangerous goods transportation and are available only with DIN 61 cap (and a 3/4” outlet nozzle on request).
The latest evolution of the C2 family is the C2 25 EU model. This jerry can has two openings, one for the filling and the emptying, the other for the air outtake during emptying.

The range of C3 is the most complete. It includes 5, 6, 7, 11, 20, 23 and 25 litres jerry cans and it can be referred to as the European Standard. The most important features of this modern range are:
a very flat bottom: to give more stability to the jerry can on the pallet and to reduce as much as possible the stress cracking which are typical of bottoms with nooks;
very high sides: in order to avoid that the cap of the lower jerry can has to partially support the weight of the one above (when stacked);
handle with closed ends: in order to avoid the stagnancy of the product during emptying;
blow moulded handle: for an easier hold
different kinds of openings: in order to allow the assembling of different closures and/or pouring systems.

This range includes open top drums with 60, 120, 150 and 220lt filling capacity. The most important feature of this range is that the dimensions and the weights of bodies, lids and galvanized steel rings are normalized to the European Standards.
Thanks to this feature the PM range is suitable for shipments in ISO-CONTAINERS. The 28, 33, 50 and 60lt versions have handles on both sides or, on request, cavities.

The range includes open top drums with 28, 33, 50, 60, 110, 120, 125 and 128 litres filling capacity.
The particular feature of this range is the external diameter, which if compared to PMN drums, is slightly smaller (for example the 120lt open top diameter is 480mm while the 120lt PMN diameter is 496mm).
Thanks to this feature the PM drums are suggested for shipments in ISO-CONTAINERS.
The 28, 33, 50 and 60lt versions have two handles on the sides or, on request, two cavities.

The new OTL drum is ideal for the safe transport of dangerous liquid goods by land, sea and air and conforms with UN law and RID/ADR OMI/IMDG OACI RTMD regulations.
The body weight amounts to 4 Kg and the drum is equipped with a special 400mm lid with a 4NU BCS 56x4 bung in order to make filling operations easier.

It’s a 130lt rectangular open top drum. Dimensions and weights of bodies, lids and galvanized steel rings are normalized to the European Standards. The rectangular shape, if compared to the common round one, has the following advantages:
better stacking: on a 1000x1200 pallets 6 rectangular drums can fit vs. 5 round drums;
better stacking in container: in a 20’ ISO-CONTAINER 144 rectangular drums can fit vs. 108 round drums.
Despite its rectangular shape, this drum is very easy to handle and perfectly stackable.

Round drum with two-2” openings: it is equipped with a comfortable superior handle and two side cavities for an easy handling. It’s perfectly stackable thanks to the particular head and bottom shape.

Rectangular drum with single opening of 46 mm; 9 drums can be palletized onto a 1000x1200 pallet layer (vs. only 6 circular drums on a 1000x1200 pallet layer ).
Thanks to the singular handle, this drum is easy to move and stack.

Round drum with two-2” openings. The dimensions of the drum and the positions of the openings are in compliance with the European standard.
The superior ring has been developed for an easy handling with the traditional pincers for steel drums and with the fork lifts.
The dimensions have been studied in order to allow the stacking of 80 pieces in an ISO 20’ container.
The shape of the upper part has been studied in order to guarantee an easy and complete emptying.
Produced with co-extrusion technology, it has a neutral internal layer, in order to avoid the contact between the product and the colour pigments. This represents a big advantage both for the food and cosmetic sectors and also for all chemical products with high extraction characteristics.

TH and TK DRUMS are easy to handle, stack and palletize. The differences with the traditional circular drums are:
13% less of effective encumbrance
20% more space on a pallet (on a 1.000x1.200 pallet layer can fit 9 TKs)
the two superior handles help in handling and completely empting the drum
on request TH and TK drums can be personalized with different colours and company logos.