Franz Toelke GmbH

Fladderweg 15, 49393 Lohne
Germany

Telephone +49 4442 9383-0
Fax +49 4442 9383-23
info@toelke.info

Trade fair hall

  • Hall 16 / D26
 Interactive hall map

Hall map

interpack 2017 hall map (Hall 16): stand D26

Fairground map

interpack 2017 fairground map: Hall 16

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.02  Machines to insert package inserts

Machines to insert package inserts

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.03  Machines for depalletizing, de-stacking, sorting, aligning and feeding of empty packagings and packaging components

Machines for depalletizing, de-stacking, sorting, aligning and feeding of empty packagings and packaging components

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.05  Machines for the assembly of packaging and packaging components (e.g. dosing pumps, syringes)

Machines for the assembly of packaging and packaging components (e.g. dosing pumps, syringes)

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.10  Product sorting and/or feeding machines

Product sorting and/or feeding machines

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.04  Fill and seal machines (FS)
  • 01.02.04.06  Fill and seal machines (FS) for Bottles

Fill and seal machines (FS) for Bottles

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.01  Filling machines for Aerosol cans

Filling machines for Aerosol cans

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.19  Filling machines for Tubes

Filling machines for Tubes

  • 01  Packaging machines and devices
  • 01.06  Additional machines and devices in the packaging process
  • 01.06.03  Equipment for adding product supplements and product information to packs

Equipment for adding product supplements and product information to packs

  • 01  Packaging machines and devices
  • 01.06  Additional machines and devices in the packaging process
  • 01.06.07  Machines or equipment for conveying, storing or arranging packages or packaging components during the packaging process (without floor trucks)

Machines or equipment for conveying, storing or arranging packages or packaging components during the packaging process (without floor trucks)

  • 01  Packaging machines and devices
  • 01.06  Additional machines and devices in the packaging process
  • 01.06.09  Punching devices

Punching devices

  • 01  Packaging machines and devices
  • 01.07  Complete packaging lines
  • 01.07.01  Primary packaging

Primary packaging

Our products

Product category: Machines for depalletizing, de-stacking, sorting, aligning and feeding of empty packagings and packaging components

Cap sorter

TÖLKE cap sorters are suitable for separating, orienting, aligning, and feeding caps, lids, or other smaller parts. They are used for feeding the components correctly to the capping machine, printing machine, optic controls, etc.

A belt or an air conveyor transports the caps. Our cap sorters can be equipped with an automatic height adjustment, which can be coupled with other machines. Depending on the output requirements, cap sorters can be manufactured in different sizes (Ø 500 - Ø 2,600 mm).

The change parts are located on pegs so that a format change can be made within the shortest time without using any tools. The contour of the caps is reproduced in the format parts. This makes an exact location possible.

An additional application area for our sorters is the supply and alignment of pumps and spray nozzles.

The output capacity of our machines includes feeding up to 2,000 caps per minute correctly into the capping machine. TÖLKE cap sorters are extremely user-friendly. Due to their very low overall height, the quick change of formats without any tools and no subsequent adjustments, quick conversion of the machine is possible.

The caps are treated very carefully and are not subject to mechanical forces. Sorting of different cap formats partly without changing parts. Additional controls can be integrated.

If needed, hoppers with a capacity of up to 5,000 litres can be used. The hoppers are installed upstream of the cap sorters.

More Less

Product category: Fill and seal machines (FS) for Bottles, Filling machines for Aerosol cans, Filling machines for Tubes

Filling machines

TÖLKE filling machines are perfectly suited for filling different containers with fluids and solids. Our range of standard filling machines includes linear or rotary models. The necessary type will be chosen according to the requirements and the specification profile of the machine. The rotary model also offers a combination with one or several of the following functions:

» Inserting plugs
» Screw-on caps, push-on caps or pumps
» Orienting of bottles/caps
» Turning/placing the bottle upside down

By using the mass-flow measuring technique, a high filling accuracy is achieved.

In comparison with inductive measuring devices, they are independent of any product conductivity in the filling. Because of this, the filling machines can be used for filling oils or liquids, i.e. products without a homogeneous distribution of conductive parts. During the mass-flow measurement, the filling quantities are adjusted infinitely by entering the values from a panel. The filling product flows through a measuring tube. Other add-ons are not necessary. This has the following results:

» product is subject to minimum loads
» better cleaning options
» less wear parts
» simple adjustment of filling quantities
» large filling areas

TÖLKE filling machines have a capacity of up to 350 bottles per minute and are suitable for a filling quantity of 5 mL to 6,000 mL.

A variety of devices such as mass-flow measurement devices (MDM) and inductive measurement devices (IDM), the metering piston, or load cells are used to meter the filling process. By using a panel to enter the values into the above-mentioned metering types, the values can be infinitely adjusted.

A quick change without the use of any tools makes it possible to transfer easily to other individual bottle sizes.

Available conveyor systems or puck systems can be integrated. CIP (Clean In Place) and SIP (Steam In Place) systems can be integrated.

The filling machine can be operated without or with different types of pucks. This results in a high flexibility for a variety of formats.

More Less

Product category: Filling machines for Aerosol cans

Aerosol technology

TÖLKE offers the following solutions in the field of aerosol technology:

» Aligning /accumulating aerosol cans
» Filling the active ingredients, including process technology, Product containers,
   pumps, etc.
» Placing the valves, including storing and supplying the valves
» Applying spray nozzles/foam heads/caps including storing in hoppers and
   supplying the caps

The design of the systems can be customer-specific and, therefore, can be optimised and adapted to meet installationrelated requirements. Depending on the output requirements, lead-time, form, and shape of the product, our systems are designed in a variety of sizes. For all components, an ATEX certificate can be issued. This ensures that an application in an explosion-hazardous environment is possible.

TÖLKE aerosol machines are capable of processing 400 bottles/cans per minute. Converting to different bottle sizes is simple, and changing format parts does not require any tools. As an option, our aerosol machines are available with an automatic format changeover function.

Many machines have been proven and tested; thus, the correct supply of components is guaranteed.

More Less

About us

Company details

For about 50 years, we have used a very elementary principle and turned it into innovative and reliable machines for the packaging industry.

Actually, placing a few bottles in their upright position is not a big challenge. However, unscrambling up to 800 bottles per minute, and automatically placing them in their correct position for filling, printing, and labelling that is a challenge! Nevertheless, for us, this is only one of many „magics" that our designers, developers, and engineers can do.

It is precisely that know-how of more than 100 qualified employees that elevated FRANZ TÖLKE GmbH to one of the most renowned companies in Germany when it comes to the manufacture of special machinery.

Efficiency results from experience.

More Less

Company data

Target groups
  • Food
  • Cosmetics
  • Beverages
  • Pharmaceuticals
  • Consumer goods (non-food)