Quality Tools S.r.l.

Via Trento, 175, 25020 Capriano del Colle (BS)
Italy

Telephone +39 030 9749234
Fax +39 030 9749227
commercial@qualitytools.it

Trade fair hall

  • Hall 13 / E39
 Interactive hall map

Hall map

interpack 2017 hall map (Hall 13): stand E39

Fairground map

interpack 2017 fairground map: Hall 13

Our range of products

Product categories

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.02  Packagings
  • 02.02.01  Aluminium packagings
  • 02.02.01.14  Semi-rigid container/trays made of aluminium
  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.02  Packagings
  • 02.02.01  Aluminium packagings
  • 02.02.01.16  Trays made of aluminium

Trays made of aluminium

Our products

Product category: Semi-rigid container/trays made of aluminium

production press line T130

The T130 press has been designed and developed exclusively for the production of aluminum food containers, dishes and trays. These products are obtained by blanking and forming of aluminum which has been unwound from a coil.

The T130 press is a “C”-frame press with 130-ton capacity. It has large side frames spaced out to allow the passage of wide aluminum strips. The large working bedplate of the press is equipped with two removable supports with a height adjustable bearing device to facilitate changing the tools.
This permits the press to use standard tools as well as tools designed with air cylinders below the bottom plate.

The press uses two brushless motors to feed the aluminum strip allowing accurate control of step and speed. The height of the feeding system is electronically adjustable to match the strip height of the tool currently in use on the press. There are 24 electronic cams (solenoid valves) controlled by a PLC and 12 fixed air connections with pressure regulators, providing easy tool setup. This large number of air outlets, located on both sides of the press, permits the use of multicavity tools.

The T130 press is equipped with eight compressed air tanks and two vacuum outlets. The pneumatic control panel is easily accessible during operation of the press.
The press may be equipped with tools for wrinkle- wall, smooth-wall, pet, airline and folded containers. The advantages of the T130 press include:
- Good accessibility and easy handling during tool loading and unloading operations.
- Complete visibility while the press is operating.
- The ability to run medium and large size singlecavity and multi-cavity tools.
- The stroke of ram is manually adjustable, and the height is electrically adjustable to permit use of tools of various shapes and sizes.
The T130 press complies with all “CE” marking requirements.

More Less

Product category: Semi-rigid container/trays made of aluminium

production press line PR01

The PR01 press has been designed and developed exclusively for the production of aluminum food containers, dishes and trays. These products are produced by the blanking and forming of aluminum which has been unwound from a coil.

The PR01 Press is a four-column eccentric-shaft press with 50- tons capacity. The robust construction and built-in lubrication system guarantee high precision and long life. The PR01 has a large bedplate with easy access on three sides.

There are six electronic cams (solenoid valves) controlled by a PLC and four fixed air connections with pressure regulators, providing easy tool set-up. The PLC can hold recipes for several tools in memory, allowing fast tool changes. The stroke and height of the ram are adjustable to match tools of various shapes and sizes.

A brushless motor feeds the aluminum strip, allowing accurate control of step and speed. The height of the feeding system is easily adjustable to match the strip height of the tool currently in use on the press.

The PR01 press complies with all “CE” marking requirements.

More Less

Product category: Semi-rigid container/trays made of aluminium

production press line TSP

The new revolutionary TSP press has been designed and developed for the production of aluminium and paper food containers, dishes and trays. These products are obtained by blanking and forming of aluminum or paper which has been unwound from a coil.

Servo press is characterized by maximum flexibility ,high production rates and short die changeover times. The slide motion curve of the press can be adapted to the forming process , the die and the automation.

The TSP servo press is a "C"-frame press with an equivalent standard press 50-ton capacity. It has large side frames spaced out to allow the passage of wide aluminium or paper strip. It has the possibility to use two foils at the same time with a special coil. The large working bedplate of the press is equipped with two removable supports with adjustable position to facilitate changing the tools and adapting to the different dimensions of them. This permits the press to use standard tools as well as tools designed with air cylinders below the bottom plate.

The press uses two brushless motors to feed the aluminium or paper strip allowing accurate control of step and speed. The height of the feeding system is electronically adjustable to match the strip height of the tool currently in use on the press.

There are 18 electronic cams (solenoid valves) controlled by a PLC and 12 fixed air connections with pressure regulators, providing easy tool set-up. This large number of air outlets, located on both sides of the press, permits the use of multi-cavity tools.

The TSP press is equipped with eight compressed air tanks and two vacuum outlets. The pneumatic control panel is easily accessible during operation of the press.

The press may be equipped with tools for wrinkled-wall, smooth-wall, or paper container production.

More Less

About us

Company details

Established in 1978, in cooperation with the American company Reynolds by now with more than 30 years' experience, QUALITY TOOLS has emerged as the leader in supplying equipment for the aluminum and paper container industry. It has customers around the world.

The company specializes in the design and manufacture of complete lines and tools for production of aluminum foil containers and paper containers with rims for food products.

Efficient production lines include presses up to 130 tons and coil widths up to 1.050 mm. Highly productive multi-cavitiy tools can feed automatic multi-lane stackers at the end of line. Internationally patented, the paper press and moulds are able to produce paper containers with rim.

The QUALITY TOOLS factory is equipped with modern machine tools including HAUSER 6 axes jig grinding machine, HERMLE 5 axes high speed milling machine and the FANUC-CHARMILLE wire cutting machine.

QUALITY TOOLS' flexible organization allows customized services for technical requests including Research & Development and Service Assistance programs for customers.

More Less

Company data

Target groups
  • Food
  • Industrial goods