Premium Exhibitor

STE TECPHARM S.L.

Avda. Universitat Autònoma, 13,Parc Tecnològic del Vallès, 08290 08290 Cerdanyola Del Vallès (Barcelona)
Spain

Telephone +34 93 5923100
Fax +34 93 5923138
stetecpharm@stegroup.com

Trade fair hall

  • Hall 8a / A15
 Interactive hall map

Hall map

interpack 2017 hall map (Hall 8a): stand A15

Fairground map

interpack 2017 fairground map: Hall 8a

Our range of products

Product categories

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.01  Complete lines for the production of pharmaceutical and cosmetic products

Complete lines for the production of pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.03  Coating systems for pharmaceutical and cosmetic products

Coating systems for pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.10  Fluid bed systems for pharmaceutical and cosmetic products

Fluid bed systems for pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.11  Granulating machines for pharmaceutical and cosmetic products

Granulating machines for pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.13  Homogenizers for pharmaceutical and cosmetic products

Homogenizers for pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.19  Mixers for pharmaceutical and cosmetic products

Mixers for pharmaceutical and cosmetic products

Our products

Product category: Granulating machines for pharmaceutical and cosmetic products

HIGH SHEAR MIXER GRANULATOR

TP G LAB – High shear mixer LAB
It has been designed to turn a fine-powder heterogeneous mixture into a uniform granulation, with increased particle size and higher density.
Innovative high quality equipment certified by accredited entities.
Fully designed and built in Europe following regulatory requirements and GMP´s normative.

Used for new products development,with a technology that easily allows to change to pilot scale. And also provides useful information for industrial batches.
It disposes 3 interchangeable bowls of 2,5 and 10 liters.
Equipped with Siemens PLC and touch panel. It allows to optimize the process and take relevant parameters.

TP G LAB includes features allowing control of the four critical variables in the granulation:

     · Mixing speed
     · Binding liquid flow
     · Dispersion of droplets size
     · Granulation end point by Time or by Torque

More and more it is important to optimize processes before industrialization. Obviously to minimize risks in time and cost. In STE we have a pilot plant for testing purposes with all equipments on a pilot scale. This facility allows the client to do a complete scaling-up for each process.

STE TECPHARM offers all range of services from: installation, integration in client facilities, start-up, qualification, training and production support.

More Less

Product category: Fluid bed systems for pharmaceutical and cosmetic products

FLUID BED

TP S LAB – Fluid bed LAB
It has been designed for 3 different processes:

     · Drying of wet granulate.
     · Top drive granulation.
     · Bottom spray coating for micro granules.

Innovative high quality equipments certified by accredited entities.

Fully designed and built in Europe following regulatory requirements and GMP´s normative.

Used for new product development, with a technology that easily allows to change to pilot scale. And also provides useful information for industrial batches.

It disposes 2 interchangeable recipients: 4,5 L and 9 L capacity.

TP S LAB allows setting up specific drying programs for each product, which are executed from the operator touch panel, through necessary commands and controllers, achieving that in the process development and program set-up we can eliminate characteristic problems, such as:

     · Formation of air channels
     · Lack of uniformity in the drying process
     · Localized overheating of the granulation
     · Attrition of the granulation as it dries

More and more it is important to optimize processes before to industrialization. Obviously to minimize risks in time and cost.  In STE we have a pilot plant for testing purposes with all equipments on a pilot scale. This facility allows the client to do a complete scaling-up for each process.

STE TECPHARM offers all range of services such as installation, integration in client facilities, start-up, qualification, training and production support.

More Less

Product category: Fluid bed systems for pharmaceutical and cosmetic products

CALIBRATOR

TP C LAB – Calibrator LAB
It has been designed to reduce the size of dry and wet granules.

Innovative high quality equipments certified by accredited entities.

Fully designed and built in Europe following regulatory requirements and GMP´s normative.

Used for new product development, with a technology that easily allows to change to pilot scale. And it also provides useful information for industrial batches.

Equipped with an electronic speed variator, this equipment is useful owing to the reduction of the size of both dry and wet granules. As well as for the preparation of  of raw materials of actives and excipients.

The TP C LAB has the following main features:

     · Lower production of fine granules

     · Totally disassembly unit, allowing a quick and easy cleaning

     · Different conical sieves, with circular or square mesh

More and more it is important to optimize processes before to industrialization. Obviously to minimize risks in time and cost. In STE we have a pilot plant for testing purposes with all equipments on a pilot scale.  This facility allows the client to do a complete scaling-up for each process.

STE TECPHARM offers all range of services: from installation, integration in client facilities, start-up, qualification, training and production support.

More Less

About us

Company details

With over than 30 years experience within the pharmaceutical sector, STE Tecpharm can rely on a  strong technological leadership and a powerful international network of suppliers and partners.

We believe that quality makes the difference and thanks to our technical advantages we can have a clear focus on our clients’ satisfaction and  provide them the best service in the industry.

More Less

Company data

Target groups

Pharmaceuticals