Urlinski Company

Wal Miedzeszynski 172, 04-987 Warszawa
Poland

Telephone +48 22 5140500
Fax +48 22 5140511
urlinski@urlinski.com.pl

Trade fair hall

  • Hall 8a / E80
 Interactive Plan

Hall map

interpack 2017 hall map (Hall 8a): stand E80

Fairground map

interpack 2017 fairground map: Hall 8a

Contact

Engineer Bartosz Sierakowski

Export manager

Phone
+48 22 5140529

Email
export@urlinski.com.pl

Our range of products

Product categories

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.01  Complete lines for the production of pharmaceutical and cosmetic products

Complete lines for the production of pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.13  Homogenizers for pharmaceutical and cosmetic products

Homogenizers for pharmaceutical and cosmetic products

  • 06  Machines and equipment for the production of pharmaceuticals and cosmetics
  • 06.02  Single machines /equipment for the production of pharmaceutical and cosmetic products
  • 06.02.19  Mixers for pharmaceutical and cosmetic products

Mixers for pharmaceutical and cosmetic products

Our products

Product category: Complete lines for the production of pharmaceutical and cosmetic products

INDUSTRIAL PROCESS LINE FOR MANUFACTURING OF COSMETIC PRODUCTS ADAPTED TO WORK IN ZONE Ex

Homogenizing – process line designed for manufacturing of pharmaceutical and cosmetic products, is equipped with two homogenizing mixers with capacity 2000 liters and two 2-tones auxiliary mixers as well as one phase mixer with capacity 600 liters. The device is done in accordance with ATEX directive. Two independent control modules enable running different processes at the same time, and two additional collectors equipped with valves with pneumatic actuators and connection sensor, enable the control of product and detergents flow. Modern equipment of the line makes it easy to control the whole technological process.

The most important features of process line:

- common operator’s platform, providing an easy access to the control elements as well as subassemblies of mixers and modules
- all elements in ATEX design
- full automation of technological process and CIP cleaning
- interior and exterior surfaces are polished to mirror
- two independent control modules with 10” touch panels (ATEX design) including process data recording with possibility to save formula to memory card
- transfer connections between mixers made of acid-resistant steel give the possibility to define products and detergents flow
- real time pH measurement during process with readout on operator panel
- precise dosing of technological water
- visualization of production process with all paths of valves
- possibility of calibration particular parameters and functions
- homogenizing mixers equipment:
          
* anchor stirrer with directing blades and two-ways acting scrapers in accordance with ATEX
          * high efficient 4-row comb-shaped homogenizer with ATEX drive
          * infinitely variable adjustment of mixer and homogenizer rotations
          * long and short by-pass – for small batches or foaming products
          * channel heating-cooling jacket for liquid utilities
          * CIP cleaning system with two shower heads
          * introduction oh the components directly over homogenizer
          * sucking powders under the liquid surface
- auxiliary mixers equipment:
         
* anchor stirrer with directing blades and two-ways acting scrapers in ATEX design
         * infinitely variable adjustment of mixer rotations
         * channel heating-cooling jacket for liquid utilities
         * CIP cleaning installation equipped with rotational shower heads
- phase mixer equipment:
         
* frame stirrer with infinitely variable adjustment of rotations and ATEX drive
         
* heating jacket for liquid utilities

More Less

Product category: Homogenizers for pharmaceutical and cosmetic products

VACUUM HOMOGENIZING MIXER 50 LITERS TYPE MZUTL 50 C

Mixer type MZUTL 50 C is the first-class homogenizing machine belonging to series of types including mixers from 5 to 5000 liters of capacity. It is designed in accordance with GMP directive and GAMP guidelines as well as FDA “scale-up” rules for manufacturing of cosmetic and pharmaceutical products. Thanks to the innovative technological solutions application, production of creams, ointments, gels or suspensions has become easy and productive. High quality of subassemblies and high-grade work, guarantee reliability and full repeatability of the process.

Homogenizing mixer MZUTL 50 C offers an easy way to adjust the production process to a wide range of products:
- infinitely variable adjustment of anchor stirrer rotational speed up to 2,5 m/s, equipped with directing blades and two-ways acting scrapers
- infinitely variable adjustment of 4-row comb-shaped homogenizer rotational speed up to 30 m/s
- lid with stirrer lifting system
- stepless product and jacket temperature adjustment
        * max / min temperature of product and jacket setting:
        * setting of temperature delta for product / jacket
        * cooling / heating speed rate adjustment
        * product / jacket temperature hysteresis
- vessel pressure value control including autonomous vacuum pump with hysteresis function
- optional path of valves for process components into vessel introduction
– sucking directly into homogenizer chamber:
        * sucking over homogenizer
        * sucking into short by-pass under the product surface
        * sucking into by-pass recirculation pipe
        * sucking under the product surface through technological pipe on the cover
        * small amount of components dosing via stub-pipe on the vessel lid
- login / access to control and administration, system parameters calibration together with process data recording in accordance with GMP directives GAMP Annex 11
- monitoring of work parameters and diagnose of the system online via Ethernet
- heated by-pass enabling to process wax based products

More Less

Product category: Mixers for pharmaceutical and cosmetic products

PHARMACEUTICAL MIXER FOR LIQUID PRODUCTS

Mobile mixer MW-P 200 F is made of acid resistant steel AISI 316L and designed for technological processes in pharmaceutical industry. High speed, double propeller stirrer secures efficient and accurate averaging of liquid substances of normal viscosity.

Mixer features:
- mobile mixer, equipped with 4 wheels made of polyamide
- material in contact with product: steel AISI 316L
- surfaces polished to mirror finish
- vacuum proof cone-shaped vessel with ellipsoid bottom
- hinged lid with lifting and lowering supporting mechanism, consisting of four gas dampers
- stirrer with two propellers on different levels
- sanitary diaphragm valve in the bottom with Tri-clamp connection
- probe for product pH measurement
- hinged manhole equipped with sight-glass, wiper and illumination
- two CIP shower heads
- sterile aeration filter
- diaphragm pump designed for product transfer or vessel cleaning in CIP cycle
- touch operational panel for machine functions co

More Less

About us

Company details

TOP QUALITY   MODERN ENGINEERING   ADVANCED TECHNOLOGY

URLINSKI has become an esteemed company with its 30 years experience and its innovative process technology ideas provided for cosmetics and pharmaceutical industries. First-class quality homogenizing mixers with anchor agitator and high-performance 4-row, comb shaped rotor-stator homogenizer, built in accordance with GMP rules are the most important devices made by URLINSKI. The useful tools variety offer technologists an easy way to adjust the production process to a wide range of products such as emulsions, ointments, creams, gels and other high viscosity or paste-like liquids. Introducing components directly into homogenizer teeth during “cold-hot” manufacturing enables users to save energy avoiding additional heating of one of the components, while sucking powder ingredients under the product surface helps to avoid dusting and production loss. The company’s range of homogenizing mixers covers machine capacity from 5 to 5000 liters useful volume designed and fabricated in conformity with “scale-up” procedure allowing users to transfer the formula from laboratory devices to industrial ones. It has been achieved thanks to the introduction of seven homogenizer dimension types. URLINSKI’s individual approach to every customer’s product specification gives the possibility to choose the optimum equipment.

More Less

Company data

Export content

max. 75%

Number of employees

50-99

Target groups
  • Food
  • Cosmetics
  • Industrial goods
  • Pharmaceuticals
  • Consumer goods (non-food)

Company information as a PDF file