STV di Salati G. & C. S.n.c.

Via Guareschi 6, 43022 Basilicanova (Parma)
Italy

Telephone +39 0521 681930
Fax +39 0521 681455
info@stvmachinery.it

Trade fair hall

  • Hall 8b / E37
 Interactive hall map

Hall map

interpack 2017 hall map (Hall 8b): stand E37

Fairground map

interpack 2017 fairground map: Hall 8b

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.07  Dosing and portioning machines
  • 01.01.07.04  Piece dosing device

Our products

Product category: Piece dosing device

AUTOMATIC LINEAR VACUUM FILLER MOD.LV2

Machine suitable to vacuum fill liquids such as oil, brine, syrup etc. in glass jars and tin cans already filled with solid products (vegetables like olives, peppers, capers, artichokes, legumes, fruit, fish fillets, cheese cubes, etc.).
Containers filled by means of the Motor-driven Filling Table or the Vibration Filler enter the Vacuum Filler on a conveyor, then they are positioned under the vacuum filling valves by a group with screw in polyzene and supports adjustable according to the size of the container.
At this stage, by the pneumatic cylinder, the valves lower and position themselves on the container, thus starting the filling procedure according to the phases:
Vacuum formation
Filling with the liquid
Vacuum breaking by contact with environment air
After the container has been vacuum filled it is conveyed to the Capping machine.
Fast change of the equipment for containers of different diameter and height.
After the start-up and the relevant adjustments the machine does not need any operator assistance.

MANUFACTURING FEATURES
Basement with supporting plate in carbon steel, structure and total covering with inspection doors in stainless steel, height adjustable supporting feet. The basement includes a liquid ring vacuum pump and the air treatment group with solenoid valves
Vacuum tank connected to the pump, equipped with vacuum gauge, manhole for washing operations and discharge valve
Filling-liquid tank with float for level control
No. 02 special vacuum filling valves (STV patented), without sliding seals, connected by flexible pipes to the vacuum tank and to the filling-liquid tank
Valves unit equipped with pneumatic cylinders for the lifting and lowering motion, mounted on a supporting column with mechanical device (wheel) for height adjustment
Stainless steel conveyor with table-top chain conveyor mounted on anti-friction material strips and fitted adjustable containment guides
Centralised single driving unit for all mechanical parts
Presetting for machine feeding by pump or gravity
One screw for one size of container is supplied with the machine
Electric control board in stainless steel
Manufacturing in AISI 304 stainless steel, except for some parts which are in a different material suitable for their functioning
Safety protection system as per CE norms.

More Less

Product category: Piece dosing device

ROTATING VACUUM FILLER MOD.CRS

Machine suitable to vacuum fill liquids such as oil, brine, syrup etc. in glass jars and tin cans already filled with solid products (vegetables like olives, peppers, capers, artichokes, legumes, fruit, fish fillets, cheese cubes, etc.).
Containers filled by means of the Motor-driven Filling Table or the Vibration Filler enter the Vacuum Filler on a conveyor, then a screw adjusts their pace and a transferring star positions them under the vacuum filling valves.
At this stage, by the pneumatic cylinder, the valves lower and position themselves on the container, thus starting the filling procedure according to the phases:
Vacuum formation
Filling with the liquid
Vacuum breaking by contact with environment air
After the container has been vacuum filled it is conveyed to the Capping machine.
The machine is height-adjustable by means of an electromechanical device.
Fast change of the equipment for containers of different diameter and height.
After the start-up and the relevant adjustments the machine does not need any operator assistance.

MANUFACTURING FEATURES
Basement with supporting plate in carbon steel, structure and total covering with inspection doors in stainless steel, height adjustable supporting feet. The basement includes the driving unit with variable speed motor, transmission devices and the air treatment group with solenoid valves
Central column mounted on bearings on which the hanging carousel for containers support is fixed
Filling carousel mounted on a telescopic column with mechanical device for height adjustment
Filling liquid tank in AISI 316 stainless steel
Central vacuum manifold, pneumatic cylinders for the valves up and down motion
Special filling valves (STV patented) without sliding seals for liquid vacuum filling
Cross mounted on bearings and fixed to 2 columns. It supports a ring on which the cams are installed for the vacuum, filling and environment air phases and also the up and down phases of the valves pneumatic cylinders. On this cross are mounted the float for the liquid level control, the vacuum filling valves and tank covers
Vacuum pump of liquid ring type in cast iron and rotor in bronze with AISI 316 stainless steel tank. The tank is connected to the machine central manifold and it is equipped with vacuum gauge, level indicator, manhole, washing sphere and discharge valve
One screw for one size of container is supplied with the machine
The machine is manufactured in stainless steel, except for some parts which are in a different material suitable for their functioning
Electric control board in stainless steel
Safety protection system as per CE norm.

On demand, the machine can be supplied with a tube nest HEAT EXCHANGER in AISI 316 stainless steel.

Vacuum Fillers of the range CRS are available in the following versions:

Mod.CRS6 (with 6 valves) for an output capacity of 4.000 containers / hour approx. of 314 ml

Mod.CRS9 (with 9 valves) for an output capacity of 6.000 containers / hour approx. of 314 ml

Mod.CRS12 (with 12 valves) for an output capacity of 7.500 containers / hour approx. of 314 ml

More Less

Product category: Piece dosing device

ROTATING VACUUM FILLER MOD.CRST

Machine suitable to vacuum fill liquids such as oil, brine, syrup etc. in glass jars and tin cans already filled with solid products (vegetables like olives, peppers, capers, artichokes, legumes, fruit, fish fillets, cheese cubes, etc.).
Containers filled by means of the Vibration Filler enter the Vacuum Filler on a conveyor, then they are synchronised by a screw in polyzene and positioned under the vacuum filling valves by an inlet star.
At this stage, by the pneumatic cylinder, the valves lower and position themselves on the container, thus starting the filling procedure according to the phases:
Vacuum formation
Filling with the liquid
Vacuum breaking by contact with environment air
After the container has been vacuum filled it is moved by means of a synchronization tooth (mounted on a plate) to the outlet tangential conveyor, in a delicate manner without abrupt direction changes in order to avoid possible centrifugal forces which would cause the pouring out of the liquid.
Pre-setting for machine feeding by pump or gravity.
The machine is height-adjustable by means of an electromechanical device.
Fast change of the equipment for containers of different diameter and height.
After the start-up and the relevant adjustments the machine does not need any operator assistance.

MANUFACTURING FEATURES
Basement with supporting plate in carbon steel, structure and total covering with inspection doors in stainless steel, height adjustable supporting feet. The basement includes the driving unit with variable speed motor, transmission devices and the air treatment group with solenoid valves
Carrousel for containers hanging support fixed on a fifth wheel
Filling carousel mounted on 4 telescopic columns with mechanical device for height adjustment
Filling liquid tank in AISI 316 stainless steel
Central vacuum manifold, pneumatic cylinders for the valves up and down motion
Special filling valves (STV patented) without sliding seals for liquid vacuum filling
Cross mounted on bearings and fixed to a column. It supports a ring on which the cams are installed for the vacuum, filling and environment air phases and also the up and down phases of the valves pneumatic cylinders. On this cross are mounted the float for the liquid level control, the vacuum filling valves and tank covers
Vacuum pump of liquid ring type in cast iron and rotor in bronze with AISI 316 stainless steel tank. The tank is connected to the machine central manifold and it is equipped with vacuum gauge, level indicator, manhole, washing sphere and discharge valve
One screw for one size of container is supplied with the machine
The machine is manufactured in stainless steel, except for some parts which are in a different material suitable for their functioning
Electric control board in stainless steel
Safety protection system as per CE norm

On demand, the machine can be supplied with a tube nest HEAT EXCHANGER in AISI 316 stainless steel.

Vacuum Fillers of the range CRST are available in the following versions:

Mod.CRST16 (with 16 valves) for an output capacity of 10.000 containers / hour approx. of 314 ml

Mod.CRST20 (with 20 valves) for an output capacity of 12.000 containers / hour approx. of 314 ml

Mod.CRST24 (with 24 valves) for an output capacity of 15.000 containers / hour approx. of 314 ml

Mod.CRST30 (with 30 valves) for an output capacity of 18.000 containers / hour approx. of 314 ml

More Less

About us

Company details

STV history began in 1974 when Giovanni Salati, the founder of the company, started the production of automatic packaging machines for the food industry.
The insight of the founder is the footprint that remains to this day: to produce technologically advanced machines, designed and made to measure for each Customer. The route over the years is characterized by the continuous search for innovative solutions, which represents a concrete Customer support. During the first decade the activity was mainly directed to the national market. Then the product range rapidly expanded to meet the growing demands of the agro-food and canning market. But it was from the '90s, with the opening of foreign markets, that the company's most significant development began. Those were the years in which the new plant in Basilicanova, just outside Parma, in the heart of the so-called "food valley", was built. Today STV is a company which deals internally with all production stages from design to final installation. It operates on all continents providing advice and timely assistance to Customers worldwide with the same passion of that first day of 1974.

More Less

Company data

Target groups
  • Food
  • Cosmetics
  • Beverages