Tecmes S.r.l.

Strada Provinciale 36, km 3,950, 26010 Vaiano Cremasco (CR)
Italy

Telephone +39 0373 278623
Fax +39 0373 278011
tecmes@tecmes-italia.com

Trade fair hall

  • Hall 13 / A65
 Interactive hall map

Hall map

interpack 2017 hall map (Hall 13): stand A65

Fairground map

interpack 2017 fairground map: Hall 13

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.05  Machines for the assembly of packaging and packaging components (e.g. dosing pumps, syringes)

Machines for the assembly of packaging and packaging components (e.g. dosing pumps, syringes)

  • 01  Packaging machines and devices
  • 01.06  Additional machines and devices in the packaging process
  • 01.06.02  Capping machines
  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.03  Auxiliary packaging
  • 02.03.05  Closures, closing means
  • 02.03.05.03  Cap closures

Cap closures

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.03  Auxiliary packaging
  • 02.03.05  Closures, closing means
  • 02.03.05.04  Caps for aerosol cans

Caps for aerosol cans

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.03  Auxiliary packaging
  • 02.03.05  Closures, closing means
  • 02.03.05.05  Capsule closures

Capsule closures

Our products

Product category: Capping machines

50/100 CAPSULES PER MINUTE

The table speed of the rotary table is of 50 cycles per minute for 10 or 12 stations. With a single track 50 are produced coffee capsules per minute or soluble products in general. With the same machine but with a double track, the productivity, always at 50 cycles, it will be 100 capsules per minute.
The machine can process different designs of compatible capsules, as molded as thermoformed and for specific models of capsules can be also supplied with the machine, kit or outfit to suit different capsules. At each station, the machine performs a specific operation and in the subsequent steps takes place always the control of the operation. Normally is a mechanical control, but also electronic or pneumatic are possible during all packaging process phases. The machines can also provide for the cutting or punching perforated film, filter paper or aluminum foils and the subsequent welding on the bottom or intermediate or top capsule.
The loading of the capsules into the machine it can be provided as by a manual loading buffer or with automatic sorter with hopper (vibration, gravitational, centrifugal system or other). The machine always provides automatic control of the weight through the dosing system by means of very precise loading cells and the final weight of the capsule by a specific control loop algorithm.
Furthermore, the option of washing capsules with nitrogen or inert gas is available for all models and the capsules sealing process runs in a modified atmosphere during all phases of dosing and capsules filling. Moreover, the control of top film positioned and welded will be controlled by camera system or with sensors of ultimate generation to ensure a safe and finished quality control.
Finally the remote modem connection (VPN) is the easy option which allows a remote link with the command operator panel of machine, two points connection between end user and our service department, for a full and reliable assistance and support all the time. All machines, under a specific customer request, can be completed by the coffee mill or the end line as packaging flow pack as carton boxes.

More Less

Product category: Capping machines

200/300 CAPSULES PER MINUTE

The table speed of the rotary table is of 50 cycles per minute for 10, 12 or 16 stations. With four tracks 200 are the produced coffee capsules per minute or soluble products in general.

With the same machine but with six tracks, the productivity, always at 50 cycles and for capsules Nespresso compatible only, it will be 300 capsules per minute.
The machine can process different designs of compatible capsules, as molded as thermoformed and for specific models of capsules can be also supplied with the machine, kit or outfit to suit different capsules.

The machine performs assembling operations of rigid parts or diaphragm or bottom cover of the same materials, providing thermal or ultrasonic welding. All the other technical characteristics are the same of the 50/100 capsules per minute production machine.

More Less

Product category: Capping machines

200/400/600 CAPSULES PER MINUTE

200/400/600 CAPSULES PER MINUTE
In this fully mechanically operated machine the conveyor belt of capsules transport and the central shaft for the motion of the linear arms are all controlled by a single motor in mechanical synchronism, as for the rotary platform in order to ensure all the reliability, accuracy and simplicity of operation typical of mechanical machines.
The nominal speed of the conveyor is 50 cycles per minute and this speed can be also increased and decreased in the synchronous machine, depending on the type of packaging process (type of capsule, grams of coffee or soluble product, welding and filling times, assembling of parts , critical controls to be provided, etc.).
The machine can process different models of compatible capsules, either molded or thermoformed and for specific models of capsules can be also supplied with the machine, kit or outfit to suit different capsules.
At each linear station, the machine performs a specific operation and in the subsequent steps takes place always the control of the operation. Normally is a mechanical control, but also electronic or pneumatic are possible during all packaging process phases.
The machines can also provide for the cutting or punching perforated film, filter paper or aluminum foils and the consequent welding on the bottom or intermediate or top capsule. The loading of the capsules into the machine it can be provided as by a manual loading buffer or with automatic sorter with hopper (vibration, gravitational, centrifugal system or other)
The machine always provides automatic control of the weight through the dosing system by means of very precise loading cells and the final weight of the capsule by a specific control loop algorithm. Furthermore, the option of washing capsules with nitrogen or inert gas is available for all models and the capsules sealing process runs in a modified atmosphere during all phases of dosing and capsules filling.
Moreover, the control of top film positioned and welded will be controlled by camera system or with sensors of ultimate generation to ensure a safe and finished quality control.
Finally the remote modem connection (VPN) is the easy option which allows a remote link with the command operator panel of machine, two points connection between end user and our service department, for a full and reliable assistance and support all the time. All machines, under a specific customer request, can be completed by the coffee mill or the end line as packaging flow pack as carton boxes.

More Less

About us

Company details

TECMES was established in 1984 by a team of applied mechanics expert, whose operational brilliance and enthusiasm are still present and of great help in the group where the company itself operates with consistent success.

Thanks to a generation where the constructive experience of mechanical units for automation the technological know-how has remained constantly the focus of innovative production improvement, with great adaptability, curiosity and solutions oriented, the company has prepared and set up in time all the basic machines with continuously updated technical and high performance renovations for assembly processes of the products required by the market, thus becoming nowadays, thanks to the skills acquired, a reference emerging point for many important industrial and manufacturing sectors.

The production program includes construction of rotary and linear base machines, special and specific mechanical structures in all manufacturing advanced industries and solutions for the coffee capsules packaging industry as well.

More Less

Company data

Target groups
  • Cosmetics
  • Industrial goods
  • Beverages
  • Pharmaceuticals