Amutec s.r.l. con socio unico

Via Donzelli da Poneta 22, Loc. il Ferrone, 50022 Greve in Chianti (FI)
Telephone +39 055 850595
Fax +39 055 850437

Hall map

interpack 2017 hall map (Hall 11): stand F31

Fairground map

interpack 2017 fairground map: Hall 11

Our range of products

Product categories

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.04  Machines for the production of packaging and packaging components
  • 02.04.05  Machines for the production of Big-bags

Machines for the production of Big-bags

Our products

Product category: Machines for the production of Big-bags


This group of machines, specially designed for the production of medium/high capacity bags, is characterised by the possibility of setting without limit the length of the bags or segments, to vary the sealing time independently from the material's running speed, as well as an accurate material's tension control inside the bag-maker provided by two nip rollers (input /output) actuated by separate brush-less servo drive motors.
The possibility to equip those machines with a vast series of accessories, as for instance shaped sealing bars for the production of garment covers, cars seat covers, continuous electronic punching units, slitters or longitudinal sealing heads, make those models particularly versatile for a wide range of applications.

More Less

Product category: Machines for the production of Big-bags


This group includes a range of machines and related accessories suitable for the production of small / medium bags, bottom sealed and perforated, either flat or gusseted, in several tracks (up to 8) starting from wide mother rolls, separated by a slit/sealing heads, to be wounded on a plastic or cardboard cores on full automatic cycle.
The high technology used by those machines allow elevated performances to be reached either in productivity, (over 350 cycles/min.), that qualitatively mainly due to the material's tension control system actuated by two servo driven brush-less motors. The automatic winder, either on the version with expandable shafts or on the version with cores feeding hopper, allow to make the changes to finished rolls in a fully automatic "non-stop" cycle.

More Less

Product category: Machines for the production of Big-bags


This group of machines, specially designed for the production of various types of bottom sealed loose bags, with an innovative command of the sealing bar (patented), that allows an accurate control of the sealing pressure and the regulation of sealing time independently from the machine’s running speed, the produced bags are stacked into pre-counted bundles by means of a double clamping system (without needles) to be collected by a gripper carriage and delivered to a programmable indexing table.
The various versions allow the production of big size very thick bags, special bags for FFS packing machines with pre-seals on the gussets, small/medium bags starting from wide mother roll separated in several tracks by though longitudinal slit/seal heads, garment covers bags, possibility to equip the machines with continuous punching units, air bubble post gusseters, single or double track surface unwinder, hydraulic roll's lift also on "shaft-less" version.

More Less

About us

Company details

Amutec s.r.l. has been established in the marketplace since 1995 and is one of the leading manufacturing companies for the construction of bag-makers and attachments for the manufacture of plastic bags.

Our products are distributed in more than 30 countries around the world.

Amutec premises are located in the central part of Italy, in the heart of Chianti's hills which is well known around the world for the production of is excellent wines.
Our premises are only 25 Km. from downtown Florence and is easily reachable from the airports of Florence, Pisa and Bologna or by road either from Rome or Milan via the A1 motorway.

Amutec specializes in the designing and construction of:

  • bag-makers for bags sealed and perforated operating in line with extruders.
  • bag-makers for bags sealed and perforated operating roll-to-roll with full automatic or semiautomatic roll change.
  • high performance bag-makers for the production of garbage bags wound core-less single or double track.
  • high performance bag-makers for the production of multi-tracks bags wound onto cardboard cores, for supermarket, vegetables, freezer, etc.
  • bag-makers for special products such as laundry bags, car seat covers, etc. wound onto cardboard cores.
  • bag-makers for special products such as laundry bags, car seat covers, etc. wound onto cardboard cores.
  • bag-makers for the production of bottom sealed loose bags stacked in pre-counted bundles and transversely folded.
  • rotating perforating units to be used in-line with extruder.

The vast experience acquired by the management at Amutec in the specific sector of bag-making construction, also during the multiple years experience made before Amutec’s foundation, has permitted the company to develop innovative machinery technologically and reaching a high standard of quality and automation.

This is composed of highly qualified staff that use the best generation of CAD (three-dimensional) drawing system, for the management of the planning and the development of high technology "Full-tech" machines.
The synergy in action among the Technical office and Commercial office combine to show expertise in the machine’s planning and construction, which allows Amutec to always strive to provide an answer to the customer's requirements.

The primary aim and philosophy of Amutec is well represented by the forging and consolidation of relationships with the customers, putting in the foreground customer satisfaction and taking care of all the commercial and technical aspects.

Amutec commercial team originates from the technical area and it's prepared above all to understand the customer's "real requirements".

The quality on the production and machine assembly is guaranteed by rigorous controls done during the whole assembly cycle, followed by an accurate final testing; carried out mainly on with client’s materials to always guarantee a real production test.

Amutec provides a qualified after-sales service, that can assist in solving the customer's problems in the shortest possible time.
Our multilingual after-sales service allows the Amutec engineers to communicate directly with customers either by phone or e-mail.

Thanks to a well furnished spare parts warehouse, Amutec can quickly respond to any possible technical emergencies.
In case of urgency, it is usually possible to ship spare parts as required within 24/48 hours from time of order.

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Industrial goods
  • Consumer goods (non-food)