TECHNO-PARTS GmbH Dichtungs- und Kunststofftechnik

Alte Bottroper Str. 81, 45356 Essen
Germany

Telephone +49 201 86606-0
Fax +49 201 86606-68
vk@techno-parts.de

Hall map

interpack 2017 hall map (Hall 7a): stand C11

Fairground map

interpack 2017 fairground map: Hall 7a

Our products

Product category: Sealing materials

Wipers

Wipers are mainly used in hydraulics and pneumatics before end seals on axially moved piston rods and plungers. The function of the wipers is to prevent dirt entering the hydraulic or pneumatic system, thereby protecting the seals, guides and bearings behind the wipers against wear and damage.

More Less

Product category: Sealing materials

FEP Encapsulated O-Rings

The FEP encapsulated seals consist of an elastomer core and a seamless capsule of FEP. The thickness of the capsule varies between 0,2 mm and 0,5 mm depending on the thickness of the cord. As far as chemical characteristics are concerned, there are hardly any differences to PTFE. FEP is resistant to virtually all media. It can therefore be used in applications requiring high chemical resistance and elasticity of the seal.

More Less

Product category: Sealing materials

Flat Gaskets

Flat gaskets in small numbers and large series, in all sizes, e.g. with expanded metal insert or segmented design. Aprovals: e.g. DVGW, KTW, WRC, BAM.

More Less

Product category: Sealing materials

O-Rings

The O-ring is a round crosssection seal used since many years in all fields of technology and industry. Due to a wide range of different dimensions and a large selection of most various materials our O-rings can be adapted to nearly every assembly situation and operation condition.

 

More Less

Product category: Sealing materials

PTFE O-Rings

O-rings of PTFE are mainly used as static seals against aggressive media and at high temperatures where conventional elastomer seals fail the extreme conditions.

More Less

Product category: Sealing materials

PTFE Lip Seals

PTFE lip seals are modern seals for a broad range of applications. They have proven their worth especially in the chemical and foodstuff industries, medicine and in fields with high chemical and thermal demands. PTFE lip seals are single-acting seals. They consist of a PTFE ring and a prestress element, which comes either as an O-ring (type 3V6) or as a profiled spring of stainless steel. Prestress springs of special materials can be used for applications with extreme chemical and thermal demands. The standard material combination is PTFE carbon/NBR or PTFE carbon/stainless steel.

More Less

Product category: Sealing materials

TECHNO-JET - High-Speed Production

TECHNO-JET High-Speed Production for Seals and Plastic Parts up to diameters of 1500 mm.

More Less

Product category: Sealing materials

X-Rings

X-rings are seals with a symmetrical four-lip profile. They are used particularly when O-rings can only be used with restriction because of their circular cross-section.

More Less

Product category: Sealing materials

Bottle pads

Bottle pads are used in filling and labelling units for damping/protection against torsion.

More Less

Product category: Sealing materials

Packing Bells

Packing bells for packing and unpacking units of various bottles and packing systems.

More Less

Product category: Sealing materials

Rollers

Rollers and wheels of various elastomers or plastics.

More Less

Product category: Sealing materials

Centering bells

Centering bells, two-part with thread, for pressure gasket rings of filling elements.

More Less

Product category: Sealing materials

Spreaders

Spreaders to divert medium in bottlenecks.

More Less

Product category: Sealing materials

Friction Reduction of Sealings for Automation Technology

Advantages:
– good wear resistance
– no stick-slip
– Seals will not stick together in automaticfeeding process
– low friction coefficient
– suitable for nearly all standard elastomer types
– no solling or contamination
– faster, more cost-efficient assembly process
– food industry approvals possible

More Less

Product category: Sealing materials

Individual packaging for seals and plastic parts

Seals and plastic parts are packed individually or as a set in a plastic bag. The transparent side of the bag makes the contents visible.The back side can be printed individually with the article number, article description, quantity, barcodes, logos, drawings or other information.

Advantages:
– air and dustproof packaged goods
– easy handling on site
– protection against harmful UV radiation
– easy storage
– protection against dirt and damage
– individual packaging possible

More Less

Product category: Sealing materials

Bellows

Bellows – protective elements for engineering and chemical industry

Materials:
  • NBR
  • CR
  • Silicone
  • EPDM
  • PUR
  • PTFE
  • Leather
Advantages:
  • Various materials available for differentapplications
  • For flexible applications, e.g. in prototypes,repairs or temporary useparticularly suitable as modular System
Application Examples:
  • Protection of joints or gear levers
  • Compensators
  • Protective element for axially movedconnecting rods
  • Flexible connection of components

More Less

Product category: Sealing materials

Pneumatic Compression/Lifting Cushions

Pneumatic Compression/Lifting Cushions for lifting, grabbing, clamping, ...

Pneumatic Compression/Lifting Cushions are used to lift load. They are also excellently siutable for squeezing, clamping, blocking, damping, grabbing, guiding, pushing ...

Used in applications like:
– Automotive Industry
– Off Shore Applications
– Wind Power Industry
– Mechanical Engineering
– Packaging
– Petrochemistry and Pharmaceutics
– Paper Industry
– Building Industry

More Less

Product category: Sealing materials

Customized Service Kits

We pack O-rings, seals and other plastic parts as individual assortments in a sturdy plastic case.

This offers the user many advantages, e.g.:
– protection against soiling and damage
– easy storage
– individual packaging
– easy handling

The lid of the case is printed individually on request with the article number, article designation, quantity or other information. A logo or barcode can naturally also be included in the imprint.

We manufacture service kits in various versions, colors and sizes. The lid can also be transparent so that the contents of the case can be seen. We will gladly advise you on the selection and optimization of your personal solution.

More Less

Product category: Sealing materials

PTFE Flat Gasket Tape

PTFE flat gasket tapes are mainly used for static sealing of flanges, containers and covers and in hydraulic and pneumatic systems. Being quick and easy to fit, malfunctions that would normally lead to relatively long and expensive production stoppages can be repaired immediately.

The flat gasket tapes are made of a special pre-stretched PTFE with a fibrous structure. This material combines virtually universal chemical resistance with good mechanical properties. PTFE is physiologically harmless and is suitable for use in the pharmaceutical and foodstuff industries.

The flat gasket tapes can be formed elastically during fitting. In this way they can be adapted to fit complicated sealing surface shapes. The flat gasket tapes have an adhesive strip on one side for easy application. The flat gasket tapes are delivered on spools.

More Less

Product category: Sealing materials

Sealing seats and valve seat seals

Sealing seats and valve seat seals of various materials according to customer specification or drawing available at short notice. Application conditions depend on the material required.

Materials:
- POM
- PA
- PTFE
- PTFE-Compound

More Less

About us

Company details

Many years' of experience in sealing systems and moulded parts for hydraulics, pneumatics, mining industry, chemical plants, apparatus engineering and drive engineering.

Seals and moulded parts for the food industry (approvals acc. to FDA, DVGW or KTW); electroconductive elastomers.

Bellows, flexible separators; pneumatic compression/lifting cushions for clamping, damping, pressing, guiding and lifting of heavy loads.

Rotary shaft seals for oversized bearings in heavy machine construction/shipbuilding; Chevron sealing sets, slide bearings and guide elements of high-performance plastics (e.g. PEEK or PTFE Compounds).

Composite slide bearings for maintenance free operation, seals for high temperatures/aggressive media (e.g. FEP encapsulated o-rings), PTFE seals, perfluorocaoutchouc seals (e.g. Parofluor).

Technical precision parts of elastomers and plastics for prototypes/repairs.

High-speed production for seals/precision parts of elastomers and plastics up to 1500mm Ø.

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Bakery products
  • Cosmetics
  • Industrial goods
  • Beverages
  • Pharmaceuticals
  • Consumer goods (non-food)