Pentapack NV

Leuerbroek 1043, 3640 Kinrooi
Belgium

Telephone +32 89 844200
Fax +32 89 844224
info@pentapack.com

Hall map

interpack 2017 hall map (Hall 17): stand A21

Fairground map

interpack 2017 fairground map: Hall 17

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.01  Form, fill and seal machines (FFS)
  • 01.02.01.01  Horizontal form, fill and seal machines (H-FFS)

Horizontal form, fill and seal machines (H-FFS)

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.01  Form, fill and seal machines (FFS)
  • 01.02.01.02  Vertical form, fill and seal machines (V-FFS)

Vertical form, fill and seal machines (V-FFS)

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.02  Form, fill and seal machines (FFS)
  • 01.02.02.01  Form, fill and seal machines (FFS) for Blisters
  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.02  Form, fill and seal machines (FFS)
  • 01.02.02.03  Form, fill and seal machines (FFS) for Cups

Form, fill and seal machines (FFS) for Cups

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.02  Form, fill and seal machines (FFS)
  • 01.02.02.05  Form, fill and seal machines (FFS) for Trays and similar containers

Form, fill and seal machines (FFS) for Trays and similar containers

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.04  Fill and seal machines (FS)
  • 01.02.04.02  Fill and seal machines (FS) for Bags

Fill and seal machines (FS) for Bags

Our products

Product category: Form, fill and seal machines (FFS) for Blisters

Blistering your production runs

The SP series : fast & versatile

  • Packaging production runs need to be done in the most economical way.  The SP series allow to produce blister packages in a flexible way and at a high output.
  • This machine is completely equipped with servo drives in each station.  This allows a complete and individual setting and control of each station.
  • Printing can be generated on the front and back-side of the blister by thermotransfer printers or by a standard platen printer.  Preprinted lidding material with steering mark can be used as well.
  • No special training is required, very easy to use and very low maintenance.
  • Manual or automatic filling.  Even the introduction of filling by means of a robot system is possible.
  • Inspection systems (eg. color camera system) can be combined with pick-off units to sort out good & bad blisters and stack blisters in to piles for further treatment.
Extra deep pockets
 
  • The SP series can produce blisters up to 40mm deep. The opening of the individual stations is according to the depth of the pocket.
  • Combine this with a film up to 250mm wide and you can pack ampoules, vials and even small prefilled seringes.  Making an assembly with multiple products is certainly possible.

Blister material
 
  • Almost all materials can be used that are known to the pharmaceutical industry. Films of 500 micron or more are possible with or without plug-assist
  • Pentapack has good connections to almost all the foil manufacturers and can distribute various foils in small quantities.  For more information, please contact our foil department (foil@pentapack.com).

More Less

Product category: Form, fill and seal machines (FFS) for Blisters

HP500 unit dose blister machine for hospitals

  • The HP500 blister machine is developped for daily use in a hospital pharmacy.
  • Batch sizes from 20 to approx. 5.000 units.
  • No special training is required, very easy to use and very low maintenance.
  • Manual filling.
  • Speed : 100 products / minute.
Standard size blister
 
  • The standard size unit dose blister (in Holland called "EAV verpakking") is a blister with 1 product in it and and coded with either a label on the back-side or direct printing on the ALU lidding material.
  • size : 25 x 50mm or 25 x 100mm

Flexible printing system
 
  • The HP500 is standard equipped with a label printer that prints inline with the machine a label.  This label is attached to the back-side of the blister.
Parts or even the entire program can be blocked with a password so that operators can change only variable data or no data at all.

For more information contact us !

Blister size and blister material
 
Although each product is packed into an individual blister, the 
HP500 is capable of making blister strips as well.  By changing a parameter in the operator panel, the length can be altered.
The materials that are being used are identical to what the pharmaceutical industry uses for the production of their own blisters.  For protection against UV, a colored film is available. For achieving a better barrier against moist, a PVC/PVdC film is available.
Pentapack has all these foils available on stock and can distribute in small quantities.  For more information, please contact our foil department (foil@pentapack.com).

More Less

Product category: Form, fill and seal machines (FFS) for Blisters

The EAS machines

What has been for many years a bench mark in the world of pharmaceutical packaging has been retired.
New GMP rules have made this machine more and more difficult to implement into a pharmaceutical environment.

More Less

About us

Company details

Pentapack NV offers packaging solutions for the pharmaceutical industry and hospitals.

More Less

Company data

Target groups
  • Cosmetics
  • Pharmaceuticals
  • Consumer goods (non-food)