PRO-TECH ITALIA SRL

Via Guido Rossa, 13-A, 16012 Busalla (GE)
Italy

Telephone +39 010 9642386
Fax +39 010 9760838
info@pro-techitalia.com

Hall map

interpack 2017 hall map (Hall 15): stand E48

Fairground map

interpack 2017 fairground map: Hall 15

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.01  Form, fill and seal machines (FFS)
  • 01.02.01.02  Vertical form, fill and seal machines (V-FFS)

Vertical form, fill and seal machines (V-FFS)

  • 04  Machines and equipment for the production of bakery products, snacks and cereals (including biscuits, waffles, etc.)
  • 04.04  Storage, logistics and transport equipment for the production of baked goods, snacks and cerials (including biscuits, waffles, etc.)
  • 04.04.01  Conveying and storage systems for the production of baked goods, snacks and cerials

Conveying and storage systems for the production of baked goods, snacks and cerials

Our products

Product category: Conveying and storage systems for the production of baked goods, snacks and cerials

VERTI - I

Stainless steel storage silos
The storage plants made by PRO-TECH ITALY are the result of a long experience gained over the years and combine characteristics of extreme strength and solidity, maximum hygiene, ease of management, low maintenance.
The storage plants are suitable for storage of different food items in addition to the traditional short pasta, such as: special pasta (nouilles, capelli d’angelo (angel hair)), dried fruit, snacks, pellets, breakfast cereals, pet food, dried vegetables, couscous etc...
For products that are particularly difficult or extremely voluminous, it is available, on request, also a special version with horizontal planes featuring metal profiles.
For the storage of special or extremely abrasive products, such as couscous, stainless steel silos are available

The silos of the VERTI-L series are made up of storage cells with one-piece plywood panels covered with
food grade extra-thick plastic laminate.
A significant feature of the one-piece panelling is the total absence of metallic profiles inside the silos, potential areas of stagnation of powder or product and source of possible contamination.
The external perimetral reinforcements of the cells make the silos extremely robust, avoiding swelling of the walls even in case of storage of extremely heavy products.
The hopper on the bottom of the silos, entirely made in AISI 304 stainless steel, guarantee extreme strength even in the presence of very high product loads, extreme hygiene of silos and durability of silos bottoms, not being subject to wear due to abrasion of the product.

The silos of the series VERTI-I are made with storage cells with bolted modular panels in AISI 304 stainless steel.
Stainless steel silos are suitable for the storage of abrasive products or products containing salt or sugar.
The reinforcements of the panels are positioned on the outside of the cells to prevent swelling, while inside the silos there are stainless steel tie rods.
The hoppers on the bottom of the silos, entirely made in AISI 304 stainless steel, guarantee extreme strength even in the presence of very high product loads, extreme hygiene of silos and durability of silos bottoms, not being subject to wear due to abrasion of the product.

More Less

Product category: Conveying and storage systems for the production of baked goods, snacks and cerials

ALFA - BETA - DELTA

Buckets elevators and conveyors
The ALFA-1 bucket lifter meets the many different transport and lifting requirements of food industries, ensuring the utmost degree of efficiency and hygienic quality.
The high attributes of the ALFA-1 lifter, as regards to reliability, strength and ease of use, make it the ideal equipment to be installed in process lines, silo plant loaders and feeders for continuous or packaging systems.
In addition to the ALFA-1, are available: the BETA1, a horizontal bucket conveyor, and the DELTA-1 for loop and complex shape layouts; the availability of all these versions, as well as the possibility of combining them, means that there are no practical limits to the possible uses of these machines.
The load-bearing structure consists of bolted modular elements, so as to obtain a structure that is both light and stiff and stable, capable of preventing the stagnation of dusts inside the machine.
The transport system is based on two chains made of high-tensile steel, simultaneously pre-stretched to ensure the perfect alignment of the buckets; the adopted type of chains ensures long duration, continuous smooth operation and reduced use of power.
The chains travel on guides made of self-lubrication plastic material inserted in aluminium casings; this type of assembly is stable and safe with any load and at any speed, and by covering the chains it ensures a high hygienic level of the transport under any condition.
Product carrying buckets are available in several models 300, 500 or 700 mm wide, for the versions made of: food-grade ABS resin or food grade ABS resin and AISI 304 stainless steel net and metal detectable food-grade ABS resin.
Buckets made of AISI 304 stainless steel are also available in the following widths: 300; 500; 700; 900; 1000 mm.
Product loading into the buckets takes place with no losses, thanks to the full overlapping between the edges of the buckets and to the sealing skids, which perfectly seal the sides of the loading area.
The motors of the lifters are equipped with a mechanical clutch with an electronic monitoring probe as overload protection.
On every machine it is possible to install many fixed or servo-controlled unloading points at any desired location, and – thanks to the 360° rotation of the buckets – product unloading is always complete, even with light or non-slippery products.

More Less

Product category: Conveying and storage systems for the production of baked goods, snacks and cerials

VERTI - L

Laminated plastic storage silos
The storage plants made by PRO-TECH ITALY are the result of a long experience gained over the years and combine characteristics of extreme strength and solidity, maximum hygiene, ease of management, low maintenance.
The storage plants are suitable for storage of different food items in addition to the traditional short pasta, such as: special pasta (nouilles, capelli d’angelo (angel hair)), dried fruit, snacks, pellets, breakfast cereals, pet food, dried vegetables, couscous etc...
For products that are particularly difficult or extremely voluminous, it is available, on request, also a special version with horizontal planes featuring metal profiles.
For the storage of special or extremely abrasive products, such as couscous, stainless steel silos are available

The silos of the VERTI-L series are made up of storage cells with one-piece plywood panels covered with
food grade extra-thick plastic laminate.
A significant feature of the one-piece panelling is the total absence of metallic profiles inside the silos, potential areas of stagnation of powder or product and source of possible contamination.
The external perimetral reinforcements of the cells make the silos extremely robust, avoiding swelling of the walls even in case of storage of extremely heavy products.
The hopper on the bottom of the silos, entirely made in AISI 304 stainless steel, guarantee extreme strength even in the presence of very high product loads, extreme hygiene of silos and durability of silos bottoms, not being subject to wear due to abrasion of the product.

The silos of the series VERTI-I are made with storage cells with bolted modular panels in AISI 304 stainless steel.
Stainless steel silos are suitable for the storage of abrasive products or products containing salt or sugar.
The reinforcements of the panels are positioned on the outside of the cells to prevent swelling, while inside the silos there are stainless steel tie rods.
The hoppers on the bottom of the silos, entirely made in AISI 304 stainless steel, guarantee extreme strength even in the presence of very high product loads, extreme hygiene of silos and durability of silos bottoms, not being subject to wear due to abrasion of the product.

More Less

About us

Company details

PRO-TECH ITALIA srl born in 2005 by Stefano and Roberto Rovati, whose goal was to design and manufacture machines and plants for the food industry, especially: pasta factories, rice mills, breakfast cereals, snacks, dried fruit and confectionery, seeds, pet food etc…
The goal of the company was to take full advantage of the experience gained over more than 30 years of working in the parent company, ROVATI COSTRUZIONI MECCANICHE, as regards technology and technical solutions applied to the transport systems for granular products, storage silos for pasta
and semi-automatics lines for pasta.

Pro-tech Italia has a company recent and fully equipped with last technologies for design, construction and assembly for its plants and use selected suppliers excellently equipped with the best and most modern construction technologies.
The in-house technical department is highly equipped with latest-generation design hardware and software: 2D designing using AUTOCAD and 3D designing using SOLIDWORKS.
To date this concept has allowed us to attain excellent results in terms of : increase in turnover, increase new customers, high quality products, cost reductions, operating flexibility, speed of execution, and economic stability.

Passion, experience, and technicians that are able to design carefully, taking every single detail into account and solving any possible hindrance, are the
ideal combination that makes a PRO-TECH ITALIA client... a satisfied client!

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Bakery products