Seamco nv

Vaartstraat 178, 2520 Ranst
Belgium

Telephone +32 3 4750660
Fax +32 3 4750574
caroline.geluykens@seamco.be

Hall map

interpack 2017 hall map (Hall 8a): stand E59

Fairground map

interpack 2017 fairground map: Hall 8a

Contact

Vincent De Boeck

Sales Manager

Bart Truyens

Sales Manager

Yves Van Bavel

Managing Director

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.06  Filling machines for Bottles
  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.13  Filling machines for Canisters

Filling machines for Canisters

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.14  Filling machines for Large containers

Filling machines for Large containers

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.05  Filling machines
  • 01.02.05.16  Filling machines for Packaging jars

Filling machines for Packaging jars

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.06  Closing machines
  • 01.02.06.04  Closing machines for Bottles

Closing machines for Bottles

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.06  Closing machines
  • 01.02.06.06  Closing machines for Cans

Closing machines for Cans

  • 01  Packaging machines and devices
  • 01.07  Complete packaging lines
  • 01.07.01  Primary packaging

Primary packaging

Our products

Product category: Filling machines for Bottles

SCALDIS LINEAR FILLER

Developed for our customers
The quality of a linear filler is key to the filling process. Sneyders is always looking for new ways to make its machines as efficient as possible. That is how the Scaldis was born. This machine is the result of a redesign of our linear filling machine, based on feedback from our customers.

Scaldis’ characteristics
The Scaldis is a linear filler you can fit out with 6 to 12 filling heads. The dosing system consists of either a piston or a flow meter. The filler is entirely servo-controlled so it operates very accurately and fast and it can be changed over very quickly. The Scaldis reaches filling speeds of 20 up to 100 bottles per minute. Moreover, if you choose for the CIP (Clean-in-place) module, you can clean the machine even better and faster.

All advantages lined up
If you choose for the Scaldis linear filler you choose for an impressive list of advantages:

  • hygienically finished machines without dead angles
  • no need for format change over equipment
  • very easy to clean
  • pre-programmed maintenance
  • waste avoidance: intelligent filling of the product tank with regard to the number of cylinders that need filling
  • industrial design
  • electronic components, control, monitor and motors from Siemens

More Less

Product category: Filling machines for Bottles

WISLA BOTTLE FILLER

Sophisticated design

Sneyders invests to continually improve its filling machines. The Wisla monobloc combines a filler and the Scaldis C XL capper into one single machine. The machine is the result of a redesign of the existing line of capping machines, the feedback from our customers and the use of new state-of-the-art technology. The result? More precise, smoother, quieter movements. And a sleek design.

How does it work?
This machine feeds the bottles in a star wheel, like any capping machine. The extra-large star wheel of the Wisla is servo-controlled and moves stroke by stroke. A beam with 2 to 4 filling caps follows the movement of the star wheel and fills during this rotational movement. At the end of the filling cycle the loading arm moves back to its initial position. Bottles are then capped stroke by stroke by a single head capper. The filling module can consist of either a piston filler or a flow meter filler.

Discover the advantages
With the Wisla you get a high-end bottle filler that ticks all the boxes:

  • very compact machine
  • more precise than other stroke-wise filling machines
  • speed of up to 3000 bottles per hour
  • electronic components, control, monitor and motors from Siemens

More Less

Product category: Filling machines for Bottles

FLUMINIS

The simplicity of proven technology
Fluminis is Sneyders’ first industrial filling machine. This filler is supplied with 4 to 10 pistons that are driven by a hydraulic pump.

Fluminis Properties
Dispensing is piston-based. The machine can fill volumes between 100 ml and 10 liters.

The advantages
Choosing Fulminis has the following benefits:

  • Proven technology
  • Fills from the bottom
  • No format parts
  • Easy operation

More Less

Product category: Closing machines for Bottles

SCALDIS CAPPER

The Scaldis C is a single head capper which is equipped with a starwheel and built in cap sorter.  All movements are driven by separate servo motors which ensures:

- Smooth transfer in starwheel with adapted speeds for each format - without splashing
- Flexibility in number of pockets in starwheels
- Torque adjustment during operation
- Large range of bottle formats
- Increased capacity

With an adapted starwheel, the machine can also handle toilet duck bottles.

More Less

Product category: Filling machines for Bottles

TIGRIS FILLER

The Tigris F/P filler is the entry filling machine of the SNEYDERS automatic fillers range and is geared towards a maximum of flexibility.  It can be equipped with one up to three filling heads.  Being a full automatic filler, the machine can also be built as a semi automatic machine with the option to convert it to a full automatic machine afterwards.  A small brother of the Scaldis machine, it is also equipped with safeguards to ensure accuracy and smooth operation.  Capacity up to 1.800 bph, accuracy of up to 0,2%.

More Less

Product category: Closing machines for Bottles

TIGRIS CAPPER

The Tigris C capper is a very versatile one head capper with servo drives.  The machine can handle both small bottles as wel as 20 litres jerry cans.  Bottles are positioned with clamps under the capping head which are easily exchanged.  Capping heights are memorized in the PLC for easy change over.  Capacities of up to 1.800 bph.

More Less

Product category: Filling machines for Bottles

BRENTA FILLER

The semi automatic filler is an off-line one head filler which suits perfectly for small series.  Its versatile use and its flexibility make it an easy tool for starters as well as for larger companies keeping their automatic lines for larger production runs.

More Less

Product category: Closing machines for Bottles

BRENTA CAPPER

With the semi automatic capper, caps are snapped on the bottle by an operator who positions the bottle with cap under the screwing head.  Screwing torque can be adjusted by changing compressed air supply.

More Less

Our trade marks

SNEYDERS

Company news

Date

Topic

Download

Mar 28, 2017

Sneyders, a brand of Seamco

Sneyders  is a brand of Seamco nv, an engineering and contracting company for filling and packaging equipment.  Seamco supplies, integrates and maintains stand alone machines as wel as turn key bottling lines from low to high speed.

Offering its own brand Sneyders next to other machine brands, provides customers with the guarantee of obtaining the correct and proven solution for their requests.  No over or under engineering.  The right solution.

With the support of the Seamco engineering team, Sneyders can provide turn key solutions for complete lines.

More Less

About us

Company details

Multidisciplinary team
Sneyders is a machine manufacturer that has been developing and building filling and capping machinessince 1987. The company was founded by Peter Sneyders, the son of an entrepreneur who was active in the manufacturing and packaging of chemicals. He knew like no other how important efficient filling machines are. To date we have a multidisciplinary team of 15 experts with years of experience. The result? High-quality machines adjusted to your specific needs.

Technology is our trademark
Sneyders develops and manufactures all machines in-house. Since our merging with Seamco in 2012 we also offer bottle rectors, labelling machines and cartoning machines. As a machine manufacturer we always think along with you. We think out-of-the-box and look for solutions unavailable elsewhere by combining existing with innovative technologies.

On top of that, our experts are available for all kinds of maintenance and repairs. So sit back, focus on the task ahead, and don’t worry about your production line one bit.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 50%

Number of employees

1-19

Target groups
  • Food
  • Cosmetics
  • Pharmaceuticals
  • Consumer goods (non-food)