MBP S.r.l.

Via Toscanini, 48/B, 46043 Castiglione Delle Stiviere (MN)
Italy

Telephone +39 0376 638479
Fax +39 0376 670727
info@mbp.it

This company is co-exhibitor of
PFM Packaging Machinery S.p.A.

Hall map

interpack 2017 hall map (Hall 13): stand C15

Fairground map

interpack 2017 fairground map: Hall 13

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.07  Dosing and portioning machines
  • 01.01.07.01  Counting devices

Counting devices

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.07  Dosing and portioning machines
  • 01.01.07.03  Gravimetric dosing

Gravimetric dosing

  • 01  Packaging machines and devices
  • 01.01  Preparing and feeding
  • 01.01.07  Dosing and portioning machines
  • 01.01.07.04  Piece dosing device

Piece dosing device

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.01  Form, fill and seal machines (FFS)
  • 01.02.01.02  Vertical form, fill and seal machines (V-FFS)

Vertical form, fill and seal machines (V-FFS)

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.04  Fill and seal machines (FS)
  • 01.02.04.02  Fill and seal machines (FS) for Bags

Fill and seal machines (FS) for Bags

Our products

Product category: Fill and seal machines (FS) for Bags

MBP CLB-6000 “Filling & Sealing” Machine

The CLB-6000 fills cups or trays of various shapes and sizes and hermetically seals them with a heat-sealed film/foil lid and and/or plastic lid. The machine can be combined with automatic filling systems for use with granular products or liquids af varying viscosity.

Production rate: up to 120 packs a minute.

Advantages: speed and hermetic sealing guaranteed.

General Features
Complete electronic control of functions enables each individual station to be controlled automatically and independently thereby guaranteeing maximum flexibility.

More Less

Product category: Vertical form, fill and seal machines (V-FFS)

Series T2 Lidding Machine

MBP T2 is a lidding machine for semi-rigid trays generally used in the fruit and vegetable sector for tender and delicate produce.

Packaging: 125 gr, 250 gr, 500 gr, 750 gr and 1000 gr PP, PET and PLA trays with lid.

Produce: delicate vegetables and fruit such as wild berries, cherry tomatoes, table grapes, apricots, peaches and cherries.

Production: up to 40 cycles/min. for 2 trays per cycle.
Total 80 trays/cycle.

Advantages: the tray packaging of delicate products safeguards their wholeness and allows them to be stored in piles.General Characteristics

The completely electronic operation control allows the managing of acceleration and deceleration slopes involving the lid conveying and positioning system, according to the type of tray and the produce contained. The machine manages 2 trays per cycle.

Packaging

PET polypropylene trays are the most widely used containers in the fruit and vegetable sector, thanks to their multi-fold characteristics. Tough, transparent, hygienic and re-usable, the trays are not only suitable for containing and preserving, but also for enhancing the produce.

More Less

Product category: Piece dosing device

Rephasing buckets

When product is packed on thermoform-fill-seal or tray lidding machines, usually with more than one lane, the transfer system from weigher to the cavities of the packaging machine is crucial in determining line speed.

Therefore MBP offers a wide range of totally customisable single and multiple 2 – 18 tray rephasing buckets that synchronise the two principal elements of the line and optimise output. Hydraulic and servo versions are available, sealed to IP66 for washdown.

More Less

About us

Company details

MBP was founded in 1980 and joined the PFM Group in 2002. Based in Castiglione delle Stiviere (Mantua) the company specialises in the design and manufacture of multi-head weighers with 8 to 24 heads as well as linear weighers and has a worldwide distribution network.

Outstanding precision and weighing speeds, flexibility, reliability, zero maintenance and ease of cleaning place MBP weighers at the cutting edge of current mechanical, hardware and software technology.
With annual sales increasing at the rate of 20 per cent, MBP now spends 8 ( or is it 10 as earlier) per cent of turnover on research and development, reflected in ever increasing technical and performance standards.
In 2006 the company introduced the revolutionary Series C2 weigher and in 2008 launched the Series C3 which represents the highest level of technology and performance available on the market today. The Series C1 is an entry-level budget weigher featuring the know-how applied to MBP's top-of-range weighers.

In 2009 MBP introduced the Series C4  linear combination weigher aimed specifically at fragile products.

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Bakery products
  • Cosmetics
  • Industrial goods
  • Beverages
  • Pharmaceuticals
  • Consumer goods (non-food)