No.2, Liushan Road, Hangbu, 324000 Quzhou, , Zhejiang
Telephone +86 570 8089512
Fax +86 570 3020512

Hall map

interpack 2017 hall map (North Entrance B): stand .B06-17

Fairground map

interpack 2017 fairground map: North Entrance B


Maggie Mao

86 570-8083325


Our range of products

Product categories

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.01  Packaging materials
  • 02.01.03  Packaging materials / Plastic (pellets, films)
  •  Packaging materials / Polyethylene (PE)
  •  Packaging materials / Polyethylene terepthalate (PET)

Packaging materials / Polyethylene terepthalate (PET)

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.01  Packaging materials
  • 02.01.08  Composite packaging materials based on
  •  Composite material made of plastics

Composite material made of plastics

Our products

Product category: Packaging materials / Polyethylene terepthalate (PET)

1side PVDC coating film

PVDC coated Nylon film


Take Nylon film as base material, then coating PVDC latex layer on it’s surface.


4) Excellent gas (oxygen, nitrogen, carbon dioxide) barrier, excellent aroma Protection
5) Excellent grease barrier
6) Superior printability
7) Excellent transparency.
8) Normal thickness: 17micron
9) Can be boilded in water(100degree,30minutes)


1) Optimum for meat vacuum packaging.
2) Tea packaging with aroma protection
3) High oil content foods (e. G. Deep-friend peanut) packing

More Less

Product category: Packaging materials / Polyethylene terepthalate (PET)

2sides PVDC coating film

Both sides PVDC coated PET


Take BOPET film (Polyester film) as base material, then coating PVDC latex layer on both sides


1) Excellent moisture, oxygen, and aroma barriers
2) Can be printed directly on the coating side
3) PVDC coating is heat sealable
4) Excellent dimensional stability
5) Typical applications: It’s usually printed on PVDC coated side, then laminated with sealant layer such as PE or CPP


Suitable for packing perfume

More Less

Product category: Packaging materials / Polyethylene terepthalate (PET)

1side Acrylic coating film

1side Acrylic coating film

More Less

About us

Company details

Zhejiang Yibai Packaging Materials Co., Ltd was founded in 2010 and located in Quzhou city, Zhejiang Province, which is close to Shanghai, the most important seaport city in the world.

Built on a seven acre land, Yibai's new 50,000 square foot manufacturing facility houses two advanced adhesive coating lines, which mainly produce PVDC and Acrylic coating films with about 5,000 tons annual capacity. PVDC coated films are safe and non-toxic materials that possess balanced yet excellent gas and moisture barrier properties as well as very good chemical resistance. PVDC coated films are widely used in flexible packaging for food, medicine and medical devices and electronic devices applications.

Yibai advances in plastic packaging technology and focuses on the safety and the quality of its products. The company complys with FDA and EU10/20111 to ensure its products meet the direct food contact packaging requirement. Meanwhile, Yibai is certified with ISO9001 and ISO14001 stardards and uses ERP management to better control the process and operation. As a result, Yibai has successfully promoted and sold its products throughout Europe and North and South America.

Yibai aims at operational excellence for its management concept; focuses on the investment in the state of art manufacturing capability; and concentrates its full attention on product quality and customer communication to better serve its domestic and overseas customers.

  The coating plant

The picture shows two coating lines with excellent designs, sophisticated devices and high speeds reaching 220 meters per minute. Yibai can produce PVDC or Acrylic coated high barrier materials using BOPET, BOPP, BOPA substrates. The product width ranges from 500 mm to 1500 mm. The coated film can be either one-side or both-side treated.

  The curing room

The curing rooms use forced air, steam heat exchanger to ensure constant temperature. Operators conduct frequent temperature check and keep process record at multiple temperature detecting and control points thus guarantee a stable curing process as well as product quality.

  The slitting plant

Yibai has two high speed slitting machines, one fully automatic high speed rewinding machine and one fully automatic high speed inspection machine. Yibai uses Japanese Panasonic PLC equipment motor control system, automatic optical correction system and Japanese inverter drive. Per customer's requirement, the film slit width can range from 300 mm to 1450 mm.

  The quality inspection department

Yibai has a quality assurance lab with four trained technicians responsible for quality inspection. The lab is equipped with a number of testing devices and equipment, such as a Mocon unit, a tensile tester and a heat sealer. The lab runs continuously for 24 hours a day to keep tracking product properties for both semi-finished and finished products. Lab samples are kept for at least one year for traceability. With ERP management system, Yibai is capable of and committed to striving for quality.


With many years exporting experience, Yibai knows the importance of packaging for shipping to ensure the product integrity. Other than internal packaging specification and standards, customer specific instructions will also be strictly followed.

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Bakery products
  • Cosmetics
  • Industrial goods
  • Beverages
  • Pharmaceuticals
  • Consumer goods (non-food)