Technopac Austria GmbH

Lilienfelder Straße 46, 3150 Wilhelmsburg
Austria

Telephone +43 2746 33060
Fax +43 2746 33060-19
info@technopac.at

This company is co-exhibitor of
ADVANTAGE AUSTRIA

Hall map

interpack 2017 hall map (Hall 7a): stand C05

Fairground map

interpack 2017 fairground map: Hall 7a

Our range of products

Product categories

  • 01  Packaging machines and devices
  • 01.02  Filling and packaging
  • 01.02.04  Fill and seal machines (FS)
  • 01.02.04.04  Fill and seal machines (FS) for Big-bags (FIBCs)

Fill and seal machines (FS) for Big-bags (FIBCs)

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.02  Packagings
  • 02.02.11  Plastic Packagings
  • 02.02.11.17  Containers for storage and transport made of plastic

Containers for storage and transport made of plastic

  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.02  Packagings
  • 02.02.11  Plastic Packagings
  • 02.02.11.24  FIBC made of plastic
  • 02  Packaging materials, packaging means, auxiliary packaging means and packaging production
  • 02.02  Packagings
  • 02.02.11  Plastic Packagings
  • 02.02.11.33  Sacks made of plastic

Sacks made of plastic

  • 07  Services
  • 07.01  Business support
  • 07.01.06  Packaging consulting

Packaging consulting

Our products

Product category: FIBC made of plastic

Big Bags (FIBC’s) with 4 lifting loops

Big bags FIBC (Flexible Intermediate Bulk Container) represent a very cost effective and ideal packaging solution for the transport and storage of dry bulk materials. They are normally made from flat woven polypropylene fabric (PP) or from circular (tubular) woven polypropylene fabrics in tubular form which may be in coated or non-coated form. Depending on the requirements for the safe working load (SWL) and the safety factor (SF) the weight of required fabrics in the construction of the bag will vary. 

More Less

Product category: FIBC made of plastic

Big Bags (FIBC) 1 or 2 loops

Big bags with 1 or 2-point lifting are simpler by design and more economical than FIBC (Big Bags) with 4 lifting loops. They are made of tubular fabric. This increases the strength and tensile strength of the fabric and improves the performance to weight ratio.

The lifting loops are protected with a sleeve. This sleeve is available in different colours. Different products can therefore be easily identified. The different colours of the sleeves on the lifting loops enables quicker product identification by the fork lift drivers and thus improves handing efficiency of the FIBC’s.

The most common design for this FIBC is with open top, uncoated and with PE liner which can be fixed to the outer bag . Designs from Coated material and filling spout are also available. Depending on the type of use, there are different design options for the bottom of the FIBC’s - square, star-shaped or with a single seam. For manual filling these FIBC’s are pressed into bales on pallets. For automatic filling lines, the bags can be supplied wound onto rolls.

More Less

Product category: Fill and seal machines (FS) for Big-bags (FIBCs)

Liner for Big bags and octabins

Some bulk materials may cause build up of static energy during the filling and emptying process which can, in the bag itself or on its surface, cause an electrostatic discharge. If explosive dusts or gases are present in the vicinity during the filling or emptying process, there is a fire or explosion risk.

To avoid this risk, a grounded FIBC (big bag) is an ideal solution. Grounded FIBC’s (big bags) are classified as Type C bags. To provide conductivity in these bags, typically carbon filaments are woven into the fabric. In food related applications, silver yarns are used as a replacement for carbon yarns to provide the necessary conductivity properties.

The fabric structure of FIBC’s (big bags) consists either of flat or tubular (circular) form, coated or uncoated. To provide additional protection, design variants with conductive liners are available. Type C FIBC (big bags) need to be grounded during the filling and emptying process. Each grounded bag, manufactured ( at one of our manufacturing plants? Rather than at Cesur??) is conductivity tested for 100% conformity.

More Less

About us

Company details

One point of contact for customer-focused solutions
Technopac Austria is more than just a sales organization for flexible packaging products.

Technopac Austria stands for reliability, responsibility and exemplary service. We are in tune with our customers' businesses every day needs. Our customers’ needs and requirements are what shapes our Company’s character and objectives as well as serving as a guide for our actions. We are your proactive partner and providing solutions is engrained in our philosophy.

Technopac is your single point of contact to coordinate an entire project.
Technopac stands for transparency and quality, reliability and customer focus.
 
Packaging for a wide range of applications
All our products are manufactured in accordance with strictly controlled ISO and HACCP standards. From standard FIBCs (Big Bags) for the construction industry to complex packaging for the food or chemical industry, we have a wide product range.

More Less

Company data

Target groups
  • Food
  • Industrial goods
  • Pharmaceuticals
  • Consumer goods (non-food)