Manage stand orders
Select Option

IPCO BV

Overemer 8 Industrie Nr. 4190, 4824 AH Breda
Netherlands
Telephone +31 76 5424142
food.nl@ipco.com

Hall map

interpack 2020 hall map (Hall 3): stand A92

Fairground map

interpack 2020 fairground map: Hall 3

Our range of products

Product categories

  • 03  Machines and equipment for the production of confectionery (Chocolate confectionery, sugar confectionery, gum)
  • 03.01  Complete lines for the production of confectionery (Chocolate confectionery, sugar confectionery, gum)
  • 03.01.07  Complete lines for the production of confectionery / Production of chocolate

Complete lines for the production of confectionery / Production of chocolate

Our products

Product category: Complete lines for the production of confectionery / Production of chocolate

BLOCK MOULDING LINE

A large volume servo piston depositor feeds pre-heated flex moulds that are weight checked before being transported into the cooling tunnel. This can be either ‘walk-through’ in design for maximum accessibility, or a narrow, space-saving design for installations where footprint is critical.

The system is highly efficient and extremely clean, and chainless conveying means minimal wear and tear for low maintenance requirements.

  • Production capacities range from 400-3,000 kg/hour
  • 0.5 kg, 1.0 kg, 2.5 kg, 5.0 kg blocks
  • Easy control via touchscreen panel
  • Unique transport system
  • Chainless conveying
  • Flex-mould system
  • Accurate dosing intelligence
  • Continuous de-moulding
  • Inline weight check
  • Low cost custom flex-moulds

More Less

Product category: Complete lines for the production of confectionery / Production of chocolate

MCC LINE

Combining three production lines in a single unit delivers a forming capacity of between 4-6 tonnes per hour – depending on chip size. It also allows the production of different recipes or product shapes/sizes at the same time.

This ultra-efficient design – overall length is just 40 m – enables producers to dramatically increase productivity without having to invest in infrastructure.

Maximum productivity and product quality is assured by the use of Rotary Depositor Modules on each line. Suitable for the production of chips from 30,000-300 pcs/kg, the IPCO RDM module delivers a consistently sized product at throughput rates of up to 2000 kg/hour. The outer depositor shell can be removed and replaced to enable production of chips of a different size, with changeover in less than 30 minutes.

The cooling tunnel itself delivers controlled cooling and solidification of the chocolate chips for a consistent, high quality end product in a form ideal for easy handling, bagging, dosing, mixing and remelting.

  • Triple layer plastic belt cooling tunnel
  • Three separate depositor modules
  • Enables different recipes or product sizes at the same time
  • Chips from 30,000-300 pcs/kg
  • High output – up to 6000 kg/hour
  • Flexible/quick changeover <30 min
  • Minimum footprint – 40 m long
  • High OEE and efficiency
  • Low maintenance, easy cleaning

More Less

Product category: Complete lines for the production of confectionery / Production of chocolate

SPECIALITY PRODUCT LINE (SPL)

As well as medium capacity throughput of industrial chips and chunks in a range of sizes, it also enables the production of decorative and gourmet chocolate products such as:

  • Bossoms
  • Shavings
Like all our steel belt-based, triple pass systems, the Specialty Production Line offers an outstanding combination of control, efficiency and product quality from a system designed to make the best possible use of every square metre of floorspace.

The products being processed – whether drops, chunks or decorative – are deposited onto a 1200 mm steel belt conveyor and transported through the cooling tunnel. They are carried back on the underside of the return stand before being removed onto an FDA PVC conveyor. They travel back through the tunnel for a third time and are discharged for downstream processing.

The system can be used for the production of chips from 30,000-300 pcs/kg, for chunks from 5x5x5 mm up to 10x6x15 mm, or for a wide range of decorative products. Capacity depends on the product type and size or product but is typically between 300-900 kg/hour.

  • Triple pass steel belt cooling tunnel
  • Chips from 30,000-300 pcs/kg
  • Chunks from 5x5x5 mm to 10x6x15 mm
  • Decorative products including rolls, blossoms and shavings
  • Capacity 300-900 kg/hour
  • Flexible/quick changeover <30 min
  • Easy control via touchscreen panel
  • Servo cutter
  • High OEE and efficiency
  • Low maintenance, easy cleaning
  • Requires only standard utilities / compressed air

More Less

About us

Company details

IPCO is an independent company owned by FAM AB – part of the Wallenberg group.

We develop customized solutions for the processing industry in a variety of applications.

  • 30+ Sales and service offices globally
  • Production facilities in Americas, Asia and Europe
  • Number of employees: 650
  • 200 M EURO annual sales
  • President: Henrik Furhoff
  • Owner: FAM AB

More Less

Company data

Target groups
  • Food
  • Confectionery products
  • Bakery products
  • Cosmetics
  • Industrial goods
  • Pharmaceuticals